Pumping Stations

Wastewater / Pumping Stations
IMG_20150517_132458_612

20160726_123748Description

ABCO Water Systems has been designing, manufacturing and installing sewage and grey water pumping stations for over 40 years. These pump stations are designed for each situation depending on site and client requirements and applicable standards; whether for water authorities, commercial and industrial customers, hospitality industry or for the private home. The design takes into consideration hydraulic loading, product to be pumped, total head (including static and friction loss) and discharge pressure requirements.

Material

The pump station housing material can vary based on the most suitable composition for the intended purpose. This includes: concrete, fiberglass and fibre cement. ABCO pump stations are suitable for installation in wet areas, sand conditions as well as rugged soil and rock excavations. Small pump stations for above ground and semi inverted installation, suitable for rapid relocation, can also be supplied.

Dimensions

Pump station dimensions can be varied to suit client requirements and expected maximum flows. These dimensions are typically between 1050mm and 2200mm diameter with depths from 600mm to 6m.

Pumps

The pumps are typically selected from the Ebara Pumps Australia Pty Ltd range and are selected as required by project conditions. These are submersible pumps and are available with various impellors, including vortex, single channel, cutter and grinder configurations. All pumps are fitted on stainless steel guide rails and quick-disconnect couplings, which allow for easy installation and servicing with no requirement for confined space entry.

Electrical

The required electrical supply can range from 240V single phase to 415V and 690V installations, and can be made suitable for both 50 and 60 frequency power supplies. The minimal electrical supply is limited by the requirements of the selected pumps. Control circuitry typically runs on 24V dc with a built in power supply for conversion from site mains. Equipment control can be managed either by standard circuit breakers or PLC/microcontroller solutions. All pump stations come equipped with a standard alarm system to indicate high levels, pump failure and restricted flow. These alarms can be expanded by choosing more intelligent control measures.

Enquire Now